Laser Dark (no cut) Low Temp

LASER DARK(No cut) A foil +B PAPER Low Temp is a Self-weeding Transfer paper for dark fabrics.

Advantages:

• Transparent print media for exact positioning
• Low processing temperature (150°C-160°C, 300°F-320°F)
• Extremely high wash fastness due to a special top-coating
• Higher white cover and stronger full-tone colors
• High processing tolerance, especially when separating A&B papers
• Suitable for OKI White Toner and CMYK Printers

The 2-Paper-System from FOREVER gives amazing brilliant colors and consistant results.

1. Print on the transparent A-Foil
2. Press together with the B-Paper LowTemp
3. Peel both sheets from each other while HOT

Now, you have white coverage on the image through the B-Paper LowTemp, which not only increase the opacity of the transfer on dark garments, but also contributes to it's washability. Both steps are done at the same temperature. The application tolerances are extremely high, reducing handling errors and allowing the user high flexibility. The transfer paper is available in sheets in A3, A4 and A4 XL (21x42) and in 100 pcs packs.

A-FOIL

This is the transfer media on which you print your image. It holds the toner extremely well, but does not leave any residues in the copier or any background on the garment. No more guessing where the transfer is applied! The transparent foil gives precise placement on your garment. Now you can place transfer onto your textile. At the last step you have to place the Hot Stamping Foil or the Flock Sheet on top of it to finish it. 

B-PAPER LowTemp

The B-Paper LowTemp was developed specifically for the A-Foil. It is finely tuned to ensure optimal processing. The special coating of the B-Paper develops its adhesive power starting at 212°F (100°C), allowing a variety of different materials or surfaces to be transfer printed. This paper brings the additional opacity, which is needed for vibrant colors by transfer printing on dark garments. The white opaque coating on the sheet only sticks to the toner on the A-Foil, and performs so well that even the finest detailed designs can be handled.

1. PRINT : Print your design in Mirror Image Mode onto the Matt Side of the A-Foil.

2. HEAT PRESS : Place the A-Foil in the middle of the lower plate (Printed side facing up). Place the B-Paper LowTemp on top of the A-Foil (coated side facing down). Cover with a sheet of Silicone or Baking Paper. The B-Paper LowTemp can be cut slightly smaller than the A-Foil. This prevents your transfer press from becoming dirty.

3. TRANSFER B-PAPER TO A-FOIL : Press the A-Foil & B-Paper together at 150°C (300°F) for 90 seconds with 2-3 bar (29-43.5 psi) medium pressure. Increase the time to 120 seconds for full-scale White Toner & CMYK designs. Separate the B-Paper LowTemp from the A-Foil without lifting them up from the lower plate of your heat press. Please work in a SLOW, LOW & FLUID MOTION. Cut around your design to remove the coating frame caused by the bleeding of the B-Paper LowTemp.

4. APPLICATION TO TEXTILES & OTHER SUBSTRATES : Place the textile or another substrate on the lower plate of the heat press.  Fix the transfer by taping the corners of the A-Foil with Heat Resistant Tape.  Press using the parameters shown indicated.  Remove the A-Foil after it is completely cold.

5. FIXING : To ensure a Matt Finish and Good Washability, it is absolutely important that you repress with a sheet of Matt Finish Economy.